S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-880009.png)
-
Install the crankshaft holder (3242) in the hole (20 Nm). Rotate the camshaft back and forth slightly if necessary to completely center the holder.
-
Tighten camshaft bolt - 1 - on exhaust camshaft of left cylinder head to initial tightening specifications.
‹› Tightening Specifications: 40 Nm.
-
Secure Hall sensor wheel on camshaft adjuster of intake camshaft of left cylinder head using setting gauge (T40047).
-
Place setting gauge (T40047) on bolt - 1 -.