S4 Quattro Wagon V8-4.2L (BHF) (2008)
/Page-880010.png)
-
Tighten camshaft bolt - 2 - on intake camshaft to initial tightening specifications.
‹› Tightening Specifications: 40 Nm.
-
Secure Hall sensor wheel on camshaft adjuster of intake camshaft of right cylinder head using setting gauge (T40047).
-
Place setting gauge (T40047) on bolt - 2 -.
-
Tighten camshaft bolt - 1 - on intake camshaft to initial tightening specifications.
‹› Tightening Specifications: 40 Nm.
-
Remove setting gauge (T40047).
-
Tighten camshaft bolt - 2 - on exhaust camshaft of right cylinder head to initial tightening specifications.
‹› Tightening Specifications: 40 Nm.
‹› Camshaft locators (T40046) must not be used as counterholder for final tightening of camshaft bolts.
-
Remove camshaft locators (T40046) on both cylinder heads.