S5 Quattro Coupe V8-4.2L (CAUA) (2009)
If the value jumps to approx. 140.0° C
-
End diagnosis and switch the ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G62).
If indication remains at approx. -40.0° C:
°Testing if display approx. 140.0 C:
-
Disconnect the Engine Coolant Temperature (ECT) Sensor (G62) electrical harness connector - 1 -.
If indication jumps to approx. -40.0° C:
-
End diagnosis and switch ignition off.
-
Replace the Engine Coolant Temperature (ECT) Sensor (G62).
If indication remains at approx. 140.0° C:
Checking wiring
If the manufacturers test box is being used, perform the following step.
-
Install the test box.
If the manufacturers test box is not being used, perform the following step.
-
Remove the Motronic Engine Control Module (ECM) (J623). Refer to => [ Engine Control Module, Replacing ] See: Powertrain