S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Lay the passenger knee airbag so the padding faces up.
Installing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
Installation is reverse of removal, but note the following:
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
‹› Ensure wires are not pinched.
-
Replace airbag securing components after a deployment.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired correctly, they may
deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Disconnect the battery ground wire with the ignition switched on.
‹› If Airbag Malfunction Indicator Lamp (MIL) (K75) indicates a fault after installation, DTC memory must be checked, deleted and checked again.
Tightening specifications, refer to => [ Passenger Knee Airbag Assembly Overview ] See: Knee Airbag Overview.