S5 Quattro Coupe V8-4.2L (CAUA) (2009)
-
Position the clutch module so the thrust pad (VW 510) rests on the support ring - arrow A - in the dual mass flywheel.
-
Place the assembly tool (T10254/3) on the pressure plate spring tabs - 1 - and press it using the press.
Pressing Distance - Dimension - x - 8 - 9 mm
A second mechanic is needed for the following step.
-
Remove all 6 bolts - 2 - and release the tension on the press.
-
Remove the pressure plate - 1 - and clutch disc.
Installing