S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
![background image](/audi/s6_wagon/l5-2226cc_2.22l_dohc_turbo_(aan)/Page-2746001.png)
Child Seat Tether Attachment: Service and Repair
Child Restraint Anchorage, Assembly (Rear Seat - Sedan Only)
NOTE: Provision is made in the rear filler panel for the installation of up to 3 child restraint tether anchor points
1. Cover
^
When installing, hook onto front of anchor bracket, then push down in rear
2. Bolt - 25 Nm (18 ft lb)
3. Anchor bracket
4. Spacer sleeve
5. Rear filler panel trim
6. Pop-rivet
^
Secures washer -7- to rear filler panel sheet metal
^
Install from top (inside vehicle)
7. Washer
^
Insert from inside trunk, secure with pop-rivets -6- from inside vehicle
^
Holes are pre-drilled in rear filler panel sheet metal
^
Holes are located in line between rear speakers
8. Cap
^
Covers anchor point when not in use or removed from vehicle
9. Rear seat belt cover
-
Remove rear seat bench, seatback.
-
Open rear lid.
-
From inside trunk locate anchorage points for washer 7, poprivets 6 in rear filler panel sheet metal.
^
Points in line between rear speakers