S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
Seat Belt: Technical Service Bulletins
Three-Point Seat Belt - Removal & Installation
Group: 68
Number: 94-04
Date: Dec. 15, 1994
Subject:
Three-point Seat Belt, B-pillar, removing/installing
Model(s): A6/S6 from 1995 my.
This Technical Bulletin supercedes bulletin, Group 68, No. 94-03, dated Nov. 15, 1994.
The following information describe the removing and installation of the B-pillar 3-point seat belt will be integrated into the next update of the
100/A6/S4/S6 Repair Manual microfiche, W42-544-192-F15.
THREE-POINT SEAT BELT, B-PILLAR, REMOVING/INSTALLING
Caution!
^
Testing, assembling and repairing three-point seat belts equipped with Pyrotechnic tensioners must only be done by trained service technicians.
^
Before connecting a tensioner, all mechanical parts, including those for the three-point seat belt, must be correctly installed and tightened.
^
Only the person involved with this procedure may be inside the vehicle.
^
Belt tensioners must not be opened or repaired. Always use new parts.
^
Belt tensioner units that have fallen from a height of 20 in. (50 cm) or more, or do not function or are damaged, must not be installed in a vehicle.
^
Belt tensioner units that are mechanically damaged (dents or cracks) must be replaced.
^
Belt tensioner units must be installed immediately after removal from the shipping container.
^
During work interruptions, the belt tensioner unit must again be placed in the shipping container.
^
Never point the open end of the belt tensioner unit toward another person.
^
After handling a belt tensioner that was discharged, always wash hands.
^
Storing and transporting pyrotechnic belt tensioner units must comply with applicable regulations for explosive devices.
^
Do not leave a pyrotechnic belt tensioner unsupervised.
^
Do not let belt tensioner units come in contact with grease or cleaning fluids.
^
Do not expose belt tensioner units to temperatures above 212°F (100°C), not even briefly or to sparks or open flame.