TT Quattro Roadster V6-3.2L (BHE) (2005)
Camshaft: Service and Repair
Camshafts, removing and installing
Special tools, testers and auxiliary items required
^
Camshaft bar T10068
^
Adhesive lubricating paste G 052 723 A2
Removing
^
Engine in vehicle
Note:
^
All cable ties which are released or cut open when removing must be replaced in the same position when installing.
^
Heat insulation sleeves that have been removed are to be reinstalled in the original position.
-
Remove timing chain from camshafts.
-
Unbolt valve timing housing (arrows).
-
Carefully separate valve timing housing from oil seals for camshafts.
-
Remove intake camshaft -A- as follows:
1 - Unbolt bearing caps 1 and 13.