TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
/Page-1882004.png)
CAUTION!
Risk of accident.
‹› Lifting hooks and alignment pins on lifting tackle must be secured with securing pins - arrows -.
‹› A vehicle with the S tronic transmission is shown in the illustration.
-
Tension engine/transmission subframe by evenly tightening the 2 spindles.
-
Remove subframe bolts - arrows - on the engine side.
-
Remove subframe bolts - arrows - on the transmission side.
-
Replace all 5 bolts in succession (if not already done when installing engine) and hand tighten.
-
Loosen left and right support arm bolts approximately 2 turns.
-
Slide engine/transmission assembly with a pry bar between engine mount - 1 - and engine support - 4 - until the following dimensions are set: