TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Make sure the cover does not tear at LATCH bracket opening.
-
Remove bolts - 3 - (quantity: 4).
‹› To provide a better overview, upholstery is shown without cover in illustration.
-
Remove bracket - 1 - upward from seat pan - 2 -.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
CAUTION!
‹› Observe safety precautions for work on airbags. Refer to => [ Airbag System General Safety Precautions ] See: Air Bag Systems/Air
Bag/Service Precautions.
‹› Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "discharge static electricity". This
can be done by touching door striker, for example.
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.