TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
-
Loosen bolts - arrows - diagonally.
-
Remove oil pan - A - with oil pan seal and let gear oil remaining in oil pan drain into oil collection and extraction device (VAG 1782).
Installing
‹› Tightening specifications, refer to => [ Oil Pan Tightening Specifications ] See: Oil Pan, Mechatronic and Transmission Fluid Pump Assembly
Overview
Install in reverse order, paying attention to the following:
‹› Replace oil pan seal and bolts.
‹› Replace O-rings - arrows - on DSG mechatronic connector.
-
Clean sealing surfaces; they must be free from oil or grease.
-
Coat O-rings on DSG mechatronic connector with gear oil.
-
Install oil pan - A - and gasket and tighten. Refer to => [ Oil Pan Tightening Specifications ] See: Oil Pan, Mechatronic and Transmission Fluid