TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft with Separable Center Support, through 05.2007, Installing
Driveshaft with Separable Center Support, through 05.2007, Installing
Install in reverse sequence; note the following points:
‹› Install all driveshaft parts marked in relation to each other in same position when reinstalling.
‹› Sealing rings in driveshaft flanges - arrow - must not be damaged when removing and installing. If seals are damaged, driveshaft must be
replaced.
‹› Slip driveshaft horizontally onto respective guide pin.
Installation position:
‹› Three projecting sleeves each on transmission flange or final drive flange and driveshaft flange engage in flexible disc mounting holes.
-
Install driveshaft on final drive so that both markings - arrows - align.
Note location of various collar bolts