1 Series E81 130i (N52K) 3-door
Before filling with sealing compound:
Moisten brush with Loctite primer, manufacturer's
number 171000. Insert brush as far as possible into grooves (1)
on crankshaft radial seal in order to coat housing partition on
engine block.
Using injector, fill both grooves (1) flush with Loctite sealing
compound, manufacturer's number 128357.
Note:
Loctite primer, manufacturer's number 171000, binds the Loctite
sealing compound, manufacturer's number 128357, and prevents
leakage.
Coat surface of sealing compound in both grooves (1) with
Loctite primer, manufacturer's number 171000.
Assemble engine.
RA Replacing crankshaft radial seal (transmission side) (N52K)
BMW AG - TIS
22.01.2013 03:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
