1 Series E81 130i (N52K) 3-door
12 41 020
Removing and installing/replacing starter
(N52, N52K, N51, N53, N54)
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove intake air manifold
Unlock plug (1) and remove.
Unfasten nut.
Tightening torque 12 41 3AZ
.
Remove battery positive lead (2).
RA Removing and installing/replacing starter (N52, N52K, N51, N53, N54)
BMW AG - TIS
22.01.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
