1 Series E81 130i (N52K) 3-door
Release screw (1).
Installation:
Replace aluminium screws.
Tightening torque 12 41 1AZ
.
Release screws (2).
Installation:
Replace aluminium screws.
Tightening torque 12 41 2AZ
.
Remove starter motor (3).
Installation:
Check starter pinion and ring gear for damage, replace starter
motor if necessary.
N53 only: In the case of a separate term. 50 lead (with
disconnector socket), the term. 50 lead is laid parallel to knock
sensor 2 behind the fuel line.
RA Removing and installing/replacing starter (N52, N52K, N51, N53, N54)
BMW AG - TIS
22.01.2013 03:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
