1 Series E81 130i (N52K) 3-door
13 62 531
Replacing coolant temperature sensor (N52/
N52K/ N53)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove intake duct
Coolant temperature sensor is mounted on cylinder head at front.
Unlock plug (1) and remove.
Release temperature sensor (2).
Installation:
Tightening torque, 13 62 2AZ
.
If necessary, top up coolant.
Check cooling system for leaks.
RA Replacing coolant temperature sensor (N52/ N52K/ N53)
BMW AG - TIS
22.01.2013 03:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
