1 Series E81 130i (N52K) 3-door
13 62 560
Removing and installing/replacing air-mass
flow sensor (N52 / N52K / N53)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
Release bolts.
Unlock plug (1) and remove.
Pull air-mass flow sensor (2) out of upper section of intake filter
housing.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass flow sensor (N52 / N52K / N53)
BMW AG - TIS
22.01.2013 03:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -