1 Series E81 130i (N52K) 3-door
23 00 019
Removing and installing transmission (GS6-
37BZ) N51/N52/N52K/N53
Special tools required:
•
00 2 030
•
00 9 010
•
00 9 120
•
00 9 130
•
21 2 221
•
23 0 132
•
23 4 050
Important!
After completion of work, check gear oil level.
Use only the approved gear oil.
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of these screws/bolts are painted blue for the
purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
RA Removing and installing transmission (GS6-37BZ) N51/N52/N52K/N53
BMW AG - TIS
22.01.2013 04:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -