1 Series E81 130i (N52K) 3-door
Note:
Slacken hook screw on ring gear (1) until it can be easily twisted
out at the inner star (2).
Open door window glass (1) until hook screws (2) are
accessible.
Important!
Risk of injury!
Disconnect plug connection (3) at power window motor (risk
of trapping).
Release hook screws (2) (turn in clockwise direction).
Note:
Door window glass (3) remove for purposes of clarity.
Raise holder (1) at lug (2) and remove door window glass (3) in
upward direction.
Installation:
Make sure door window glass (1) is correctly seated on
holder (2) and window guide (3).
Adjust door window glass.
Carry out function check on power window unit and anti-trapping
protection.
If necessary, normalize power window unit.
RA Removing and installing/replacing door window glass, front left or right
BMW AG - TIS
22.01.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -