1 Series E81 130i (N52K) 3-door
52 26 005
Removing and installing or replacing rear
seat
Unclip rear seat on left and right towards top.
Installation:
Feed seat belt buckles (1) into openings in rear seat.
Release screw (2) on middle seat belt anchor fitting.
Tightening torque 72 11 22AZ
.
Installation:
Pin (3) determines the installation position and prevents the
anchor fitting (1) from turning.
Feed anchor fitting out of rear seat.
Lift out rear seat.
RA Removing and installing or replacing rear seat
BMW AG - TIS
22.01.2013 08:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
