1 Series E81 130i (N52K) 3-door
63 12 871
Replacing ignition unit for right xenon
headlight (with xenon bulb) (from 03/2007)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Important!
Ignition unit and xenon bulb are viewed as a single
component and must not be separated.
N54:
Release nuts (1) and screw (2).
Feed vacuum hoses (3) out of retaining clips (4).
Remove bracket with vacuum reservoirs (6) towards top and set
down on expansion tank (5).
Installation:
Make sure vacuum hoses (3) are correctly laid.
Unlock spring wire clips (1) in direction of arrow.
Remove cover (2) in upward direction from headlight (3).
Installation:
Make sure cover (2) is correctly seated on headlight (3).
RA Replacing ignition unit for right xenon headlight (with xenon bulb) (from 03/200
BMW AG - TIS
22.01.2013 09:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -