1 Series 128i (N52K) Coupe
Depending on version:
Release screws (1) on carrier (2).
Remove shock absorbers (3) on left/right.
Release washer fluid hose (4) from carrier (2).
If necessary, disconnect plug connections (1) on fanfare horn.
Release blind rivets (2) on left/right.
Release nuts (3) on left/right.
Tightening torque 51 11 2AZ
.
If necessary, remove fanfare horn holder (4).
Remove carrier (5).
Installation:
Blind rivets (2) are only required for fitting in the factory and do
not have to be refitted.
RA Removing and installing/replacing carrier for front bumper trim
BMW AG - TIS
17.01.2013 18:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
