1 Series 128i (N52K) Coupe
51 46 050
Removing and installing/replacing top trim on
rear apron
Necessary preliminary tasks:
•
Remove luggage compartment floor trim (luggage
compartment mat)
Detach seal (1) in covered area of trim (2).
Release screws (3).
Release expander rivets (4) and lever out trim (2) in
inward/upward direction.
Installation:
If necessary, replace damaged expander rivets (4).
Replacement:
Lift off cover (1).
If necessary, feed out universal holders (2).
RA Removing and installing/replacing top trim on rear apron
BMW AG - TIS
17.01.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -