1 Series E87 118d (M47T2) 5-door
Make sure pressure line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 8AZ
.
Release bolts (1) and remove vane pump (2).
Tightening torque 32 41 5AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing/replacing power steering vane pump (M47T2)
BMW AG - TIS
18.01.2013 10:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
