1 Series 125i (N52K) Convertible
![background image](/bmw/1_Series_E88/125i_N52K_CONVER/page-872001.png)
51 49 000
Removing and installing/replacing panel for
rear lid
Release both brackets (1) and remove warning triangle.
Release screws and remove both brackets (1).
Release expansion rivets (2) and remove trim (3).
Installation:
If necessary, replace damaged expander rivets (2).
RA Removing and installing/replacing panel for rear lid
BMW AG - TIS
17.01.2013 16:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -