3 Series E36 318i (M44) SAL
Tighten down the cylinder-head bolts in order 1 ... 10.
Tightening torque,
refer to Technical Data 11 12 6AZ
Place the adjusting screw of the slide rail free of play on the
cylinder head.
Insert the screw and tighten down the slide rail.
Locate camshaft with Special Tool 11 3 240 in firing TDC
position of first cylinder.
RA Removing and installing cylinder head (M44)
BMW AG - TIS
27.01.2013 02:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
