3 Series E36 318i (M44) SAL
Secure crankshaft in TDC position with Special Tool 11 2 300.
Caution!
Remove Special Tool prior to operating engine.
Loosen the remaining two screws on each chain wheel.
Align the camshafts so that Special Tool 11 3 240 is flushly
seated on the cylinder head.
Tighten two screws for each chain wheel.
For tightening torque,
refer to Technical Data 11 31 3AZ
RA Adjusting timing of camshaft(s) (M44)
BMW AG - TIS
27.01.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
