3 Series E36 318i (M44) SAL
Plug weld reinforcement plate to entrance joint.
Plug weld reinforcement plate to C-pillar.
Spot weld in door opening.
Spot weld and produce brazed seam.
Spot weld entrance joint so close together that a welded seam is
produced.
Caution!
Always wait until a welded spot has cooled down before
producing an adjacent spot.
Danger of distortion!
RA Replacing wheel housing, rear left or right (side panel removed)
BMW AG - TIS
27.01.2013 07:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -