3 Series E36 318i (M44) SAL
Spot weld C-pillar joint so close together that a welded seam is
produced.
Caution!
Always wait until a welded spot has cooled down before
producing an adjacent spot.
Danger of distortion!
Grind down welded surfaces.
Tin out entrance and C-pillar joint and grind down.
RA Replacing wheel housing, rear left or right (side panel removed)
BMW AG - TIS
27.01.2013 07:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
