3 Series E36 318is (M44) COUPE
Caution!
Be careful not to damage the spray nozzles for cooling the
pistons when installing the pistons.
Attach crankpin to connecting rod.
Apply light coat of oil to connecting-rod bearing shells.
Place bearing caps in position, making sure that matching
numbers are paired.
Install new conrod bolts.
Tighten down conrod bearing with special tool 00 9 120 or with
special tool 11 2 110.
Tightening torque,
refer to Technical Data 11 24 1AZ
Check the setting of the spray nozzles.
Attach special tool 11 7 320 to the intake side in the receiving
bore hole in the engine block.
RA Removing and installing or replacing all pistons (M44)
BMW AG - TIS
05.02.2013 04:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -