3 Series E36 318tds (M41) SAL
11 31 505
Adjusting timing of camshaft (M41)
(re Oper. No. 11 31 005)
Note:
Before performing the adjustment work, the camshaft timing
must be checked,
refer to 11 31 005
Removing vacuum pump,
refer to 11 66 000
Loosen sprocket screw.
Note:
Fit screw with no clearance to ensure that sprocket can still
rotate on camshaft.
Aligning camshaft.
Note:
Special tool 11 3 320 must be fitted flush to the cylinder
head.
RA Adjusting timing of camshaft (M41)
BMW AG - TIS
06.02.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -