3 Series E36 318tds (M41) SAL
23 21 706
Replacing bearings on all transmission shafts
(S5D 200G/ E36 M41)
Transmission removed.
Removing input and output shafts,
refer to 23 21 505
Bearings on output shaft in rear section of case (rear case):
Secure rear case on assembly frame 00 1 490 using special tool
23 0 100.
Unfasten screws and remove retaining plates (1).
Drive bearings out with special tools 23 1 340 / 00 5 500.
RA Replacing bearings on all transmission shafts (S5D 200G/ E36 M41)
BMW AG - TIS
06.02.2013 22:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
