3 Series E36 318tds (M41) SAL
Determine location and mark cutting line on C-pillar.
Distance (A) = 30 mm
Support the roof.
Cut through C-pillar along cutting line.
Drill off welding spots in door opening.
Drill off welded spots and break brazed seam.
Take off C-pillar.
Remove scrap metal.
Uncover welded spots on inside of wheel housing joint and
hatrack joint.
RA Replacing outer section of left or right rear wheel housing (side panel removed)
BMW AG - TIS
07.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -