3 Series E36 318tds (M41) SAL
Uncover welded spots on entrance joint.
Uncover welded spots on hatrack joint.
Uncover welded spots on wheel housing extension joint.
Drill off all uncovered welded spots. Take off wheel housing outer
section. Remove scrap metal.
Straighten and grind joint surfaces.
Fit in new C-pillar section. Mark cutting line and cut off.
RA Replacing outer section of left or right rear wheel housing (side panel removed)
BMW AG - TIS
07.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -