3 Series E36 318tds (M41) TOUR
Unfasten sprocket and remove.
Caution!
Rotate engine into 45
°
before TDC setting.
Rotate engine on central screw counter-enginewise to approx.
45
°
before TDC.
This prevents contact between valves and pistons.
Evenly unfasten bearing cover on camshaft in 1/2 turn steps from
outside to inside.
Remove bearing cover and lift out camshaft.
RA Replacing camshaft (M41)
BMW AG - TIS
06.02.2013 20:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -