3 Series E36 318tds (M41) TOUR
Apply special tool 33 4 020.
Screw special tool 23 1 300 on to 23 1 280.
Pull out bearing shell.
Install new bearing shell (1) with recess on bearing shell aligned
with the locking device (2) in the case.
Drive bearing shell (1) into limit position with special tool
23 1 260 / 00 5 500.
RA Replacing bearings on all transmission shafts (S5D 200G/ E36 M41)
BMW AG - TIS
06.02.2013 22:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -