3 Series E36 325i (M50) CONVER
Removing VANOS control unit (M50 VANOS)
Take off plastic cover. Lift out lock and remove plastic cover for
the intake camshaft.
Crank engine in direction of rotation until cam peaks of intake and
exhaust cams in cylinder No. 1 face each other.
Hold crankshaft in TDC position with Special Tool 11 2 300.
Caution!
Remove special tool prior to operating engine.
Secure camshaft with special tool 11 3 240.
RA Removing VANOS control unit (M50 VANOS)
BMW AG - TIS
08.02.2013 06:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -