3 Series E36 M3 (S50) CONVER
11 22 500
Removing and installing or replacing flywheel
(S50) (clutch removed)
Block the flywheel using Special Tool 11 2 170.
Unfasten screws and remove flywheel.
Installation note:
Clean thread and install new micro-encapsulated screws.
Tightening torque,
refer to Technical Data 11 22 1AZ
Installation note:
Remember to fit hollow bush.
RA Removing and installing or replacing flywheel (S50) (clutch removed)
BMW AG - TIS
09.02.2013 20:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -