3 Series E36 M3 (S50) CONVER
11 23 010
Removing and installing or replacing
vibration damper (S50)
Removing fan coupling with fan shroud,
refer to 17 11 031/11 52 020
Remove front underbody protection,
refer to 51 47 490
Remove drive belt for alternator,
refer to 11 28 010
S50 B32
Unfasten plate for TDC check.
Installation:
Check dowel sleeves for signs of damage and correct
installation. Note direction of installation for plate used for
establishing TDC position.
Unfasten screws and remove belt pulley.
Arrest vibration damper with Special Tool 11 2 490.
Release screws and remove vibration damper.
RA Removing and installing or replacing vibration damper (S50)
BMW AG - TIS
09.02.2013 20:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
