3 Series E36 M3 (S50) CONVER
If applicable, determine amount of deviation.
Loosen chain using special tool 11 3 400 to make corrections.
With chain lifted, turn VANOS gearbox sprocket in opposite
direction to deviation.
Apply preload to crankshaft once again by rotating eccentric shaft.
Check whether sensor pin on chain wheel of VANOS transmission
aligns with marking on end cover.
Note:
When checking also ensure that timing chain between
crankshaft and sprocket is tensioned.
RA Replacing all camshafts (S50 B30)
BMW AG - TIS
09.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -
