3 Series E36 M3 (S52) COUPE
Determine friction torque with special tool 00 2 000 or 00 2 010
and note down result.
Brace input flange with special tool 23 0 020 and unfasten nut.
Remove input flange with special tool 33 1 150.
Extract shaft seal with special tool 00 5 010.
RA Replacing shaft seal and input flange on final drive (Type K / M / G)
BMW AG - TIS
10.02.2013 05:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -