3 Series E36 Z3 (M52) ROADST
Unscrew collar nut using special tool 31 2 080.
Installation:
Replace collar nut.
Tightening Torque,
refer to Technical Data 31 21 1AZ.
Lock collar nut.
Pull off bearing unit with special tool 31 2 116 / 33 4 201 /202 /
203 and wheel studs (1).
Caution!
Never re-use a pulled-off bearing unit.
If necessary, pull inner bearing race off axle stub.
Attach special tool 33 4 406 / 401 to inner bearing race and
compress until special tool can still just be turned.
Withdraw inner bearing race with special tool 33 4 402.
RA Replacing bearings (wheel hub) for front wheel
BMW AG - TIS
11.02.2013 03:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
