3 Series E46 316i (M43TU) SAL
11 13 000
Removing and installing, sealing or replacing
oil pan (M43TU)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Unscrew and remove splash guard.
Drain engine oil,
refer to 00 00 249.
Fit special tool 00 0 200 to special tool 00 0 201 / 202 / 204 /
208 and attach.
Secure special tool 00 0 200 to the front suspension lug on the
engine.
Note:
The supports (1) of special tool 00 0 208 must rest on bolt
connection of both side walls.
Tighten the screws (1 and 2).
Raise engine with special tool 00 0 200 approx. 5 mm.
RA Removing and installing, sealing or replacing oil pan (M43TU)
BMW AG - TIS
19.01.2013 10:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -