3 Series E46 316i (M43TU) SAL
Detach guide tube for oil dipstick from manifold lower section.
Installation:
Replace sealing ring.
Remove clamping screw from steering spindle.
Installation:
Tightening Torque,
refer to Technical Data 32 31 1AZ.
Release left and right stabilizer bars on engine mount.
Installation:
Installation regulations and Tightening Torque,
refer to 31 35 000.
Brace front axle support with special tool 00 2 030 in
conjunction with special tool 31 2 220.
RA Removing and installing, sealing or replacing oil pan (M43TU)
BMW AG - TIS
19.01.2013 10:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
