3 Series E46 316i (M43TU) SAL
11 28 010
Replacing alternator drive belt (M43 / M43TU)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
If necessary, remove fan clutch with fan impeller and fan cowl,
refer to 11 52 020 / 17 11 031.
Version with hydraulic belt tensioner:
Using a torque wrench, compress alternator drive belt tensioner.
Remove drive belt.
Installation:
Check drive belt for coolant and oil residues, replace if
necessary.
Caution!
It is essential to replace drive belt if it comes into contact with
hydraulic fluid.
RA Replacing alternator drive belt (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
