3 Series E46 316i (M43TU) SAL
12 14 523
Replacing pulse generator on inlet camshaft
(M43TU)
Turn off ignition.
To facilitate work, unscrew solenoid valve (1) with retainer.
Disconnect plug connection (2).
Release screw on pulse generator.
Remove pulse generator (1).
Installation:
Check sealing ring for possible damage, replace if necessary.
Read out fault memory of DME control module, check stored fault
messages, rectify faults, cancel fault memory.
RA Replacing pulse generator on inlet camshaft (M43TU)
BMW AG - TIS
19.01.2013 10:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -