3 Series E46 316i (M43TU) SAL
12 41 020
Removing and installing or replacing starter
(M43TU)
Follow instructions on disconnecting and connecting battery,
refer to 12 00 ...
Switch off ignition.
Battery negative lead : Release battery terminal and remove and
cover battery negative lead.
If fitted:
Remove engine underguard (1 and 2).
To improve accessibility to starter, remove plastic hoses (1 and 2).
Caution!
Removal, installation and sealing of fuel lines is described in
the Chapter Replacing fuel hoses,
refer to 13 53 540.
Installation:
Clip fuel hoses (1 and 2) into holder (3).
RA Removing and installing or replacing starter (M43TU)
BMW AG - TIS
19.01.2013 11:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
