3 Series E46 316i (M43TU) SAL
Note:
Heat up shrink-fit hose until it has settled completely around
the connection point.
When laying the repaired battery positive cable, observe the
following:
•
The shrink-fit hose must not be scuffed during any
movement.
•
The repair cable must not cause any disturbing noises during
driving operation.
Note:
Offsetting cutting line by approx. 10 cm produces excess
length of battery positive lead (1).
Lay battery positive lead (1) without kinks or abrasions.
(Shown on E46 touring.)
RA Replacing safety battery terminal (SBK)
BMW AG - TIS
19.01.2013 11:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
