3 Series E46 316i (M43TU) SAL
Release screws (1) (4 altogether) at top and bottom of throttle
assembly.
Remove throttle assembly.
Installation:
Replace gasket between throttle assembly and intake air
manifold.
To facilitate installation, coat boot with anti-friction agent.
Read out fault memory of DME control module, check stored
fault messages, rectify faults, cancel fault memory.
RA Removing and installing/sealing throttle assembly (M43TU)
BMW AG - TIS
19.01.2013 11:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -