3 Series E46 316i (M43TU) SAL
13 90 500
Replacing tank venting valve (M43TU)
Turn off ignition.
Disconnect plug connection (1).
Detach vent hose (2); to do so, press locking bracket and remove
vent hose.
Turn tank venting valve counterclockwise through 90
°
so that
connection piece (2) can be removed from retainer on intake filter
housing.
Remove tank venting valve with rubber mount (1) from retainer
towards top.
Detach hose (1) from tank venting valve (2).
Remove tank venting valve.
Installation:
Read out fault memory of DME control module, check stored
fault messages, rectify faults, cancel fault memory.
RA Replacing tank venting valve (M43TU)
BMW AG - TIS
19.01.2013 11:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -